R4000

There. Where you need it – the R4000.

With the mobile R4000 you acquire an air decontamination system for the different particulate cleanliness requirements of your health facility, cleanroom or laboratory. It has been produced to the ISO 14644 and NF S90-351 standards. The R4000 is low maintenance and was designed especially for risk areas 2 and 3. With a noise level below 50 dB at 1500 m³/h, the R4000 operates extremely quietly and is therefore ideally suitable for a large number of hospital areas, cleanrooms or labs. For example, thanks to the quiet running of the R4000, communication in the OP is ensured just as reliably as maximum peace and quiet in the wards or intensive care area. The R4000 relieves your hospital budget, because the mobile air decontamination system has been proven to operate economically and it is not difficult to install.

Arguments in favour of the R4000:

Separation and destruction of microbiological, chemical and particulate pollutants
Air flow rate up to 4000 m³/h
Conformity for air-conditioned rooms up to ISO 5 according to the NF S90-351 standard
Airborne risk management
Minimisation of odour nuisance due to proven, recognised mechanisms
Cost-efficient thanks to low-energy technology
Maximum quiet running thanks to low noise level
State-of-the-art technology based on automated control and performance analysis by integrated PLC
Easy retrofitting of modules/kits to produce positive or negative pressure (partial vacuum)

The hard technical facts:

Available pressure: 450 Pa
Suitable for volumes / areas to be treated between 50 and 400 m³
Double-skin panelling 40 mm thick
Stainless steel, painted RAL 9010
Mineral wool sound insulation 90 kg/m³
Electronically commutated (EC) motor and its own pressure sensor
Control of the constant air flow rate depending on filter blockage level
Prefilter G4 and fine filter F8 mounted on rails
H14 or U15 terminal filter with locking cams and pressure controller
Non-thermal catalyst activated by 8 UVC lamps from 200 to 800 W depending on environment
Motor from 40 to 1400 W depending on throughput (air flow rate)
Voltage supply: 210 – 240 V, 50 Hz, single phase
Weight: 280 kg